CAM Drilling/ru

PocketShape

MillFace

CAM

Описание

The Drilling tool generates a drilling Operation in the Job.

Above: CAM Drilling operation sample

Применение

1. There are several ways to invoke the command:
   • Press the CAM Drilling button.
   • Select the CAM → Drilling option from the menu.
2. In the Operation section:
   • Select a ToolController.
   • Select a Coolant Mode.
   • Optionally enable and adjust the following:
     • Peck set the Depth.
     • Dwell set the Time in seconds.
     • Extended Depth.
3. In the Base Geometry section confirm that the list matches the holes that are intended for processing, and adjust add, enable, or disable, as necessary. Holes can be added by selecting the wall faces of the Holes.
4. In the Depths section check, and if required adjust, the Start Depth and Final Depth.
5. In the Heights section check, and if required adjust, the Safe Height and the Clearance Height.
6. Press the OK button to generate the drilling path(s).

Примечания

• When using edges for Base Geometry, always select the bottom edge of the hole.
• Always verify the tool chosen is the correct diameter for the hole(s) selected.
• Peck disabled generates (G81 canned drill cycles). Peck enabled generates (G83 canned drill cycles).
• Dwell enabled is currently unsupported, but is intended to generate (G82 canned drill cycles).

Свойства

Note : Not all of these Properties are available in the Task Window Editor. Some are only accessible in the Data tab of the Properties View panel for this Operation.

Base

Note: It is suggested that you do not edit the Placement property of path operations. Rather, move or rotate the CAM Job model as needed.

• ДанныеPlacement: Overall placement[position and rotation] of the object - with respect to the origin (or origin of parent object container)
  • ДанныеAngle: Angle in degrees applied to rotation of the object around Axis property value
  • ДанныеAxis: Axis (one or multiple) around which to rotate the object, set in sub-properties: X, Y, Z
    • ДанныеX: X axis value
    • ДанныеY: Y axis value
    • ДанныеZ: Z axis value
  • ДанныеPosition: Position of the object, set in sub-properties: X, Y, Z - with respect to the origin (or origin of parent object container)
    • ДанныеX: X distance value
    • ДанныеY: Y distance value
    • ДанныеZ: Z distance value
• ДанныеLabel: User-provided name of the object (UTF-8)
• ДанныеDisabled: List of disabled features

Depth

• ДанныеClearance Height: The height needed to clear clamps and obstructions
• ДанныеFinal Depth: Final Depth of Tool- lowest value in Z
• ДанныеSafe Height: The height above which Rapid motions are allowed. (Rapid safety height between locations)
• ДанныеStart Depth: Starting depth of Tool - first cut depth in Z

Drill

• ДанныеAdd Tip Length: Calculate the tip length and subtract from final depth
• ДанныеDwell Enabled: Enable dwell
• ДанныеDwell Time: The time to dwell between peck cycles
• ДанныеPeck Depth: Incremental Drill depth before retracting to clear chips
• ДанныеPeck Enabled: Enable pecking
• ДанныеRetract Height: The height where feed starts and height during retract tool when path is finished
• ДанныеReturn Level: Controls how tool retracts Default=G98

Path

• ДанныеActive: Make False, to prevent operation from generating code
• ДанныеComment: An optional comment for this Operation
• ДанныеUser Label: User assigned label
• ДанныеTool Controller: Defines the Tool controller used in the Operation

Rotation (when available)

• ДанныеAttempt Inverse Angle: Automatically attempt Inverse Angle if initial rotation is incorrect.
• ДанныеB_Axis Error Override: Visually orient B(y) rotations to model (error in FreeCAD rendering).
• ДанныеEnable Rotation: Enable rotation to gain access to holes not normal to Z axis.
• ДанныеInverse Angle: Inverse the angle of the rotation. Example: change a rotation from -22.5 to 22.5 degrees.
• ДанныеReverse Direction: Reverse orientation of Operation by 180 degrees.

Tasks Window Editor Layout

Descriptions for the settings are provided in the Properties list above.

This section is simply a layout map of the settings in the window editor for the Operation.

Base Geometry

• Add: Adds selected element(s) which should be the base(s) for the path(s).
• Delete: Delete the selected item(s) in the Base Geometry list.
• Clear: Clear all items in the Base Geometry list.

Base Location

• Add: Add an (X,Y) coordinate location to the current drilling operation.
• Remove: Remove the selected location item(s) from the Base Location list.
• Edit: Edit the selected location item.

Depths

• Start Depth:
• Final Depth:

Heights

• Safe Height:
• Clearance Height:

Operation

• Tool Controller:
• Retract Height:
• Peck:
• Peck Depth:
• Dwell:
• Dwell Time:
• Use Tip Length:

Scripting

Example:

#Place code example here.

PocketShape

MillFace

CAM

CAM

• Project Commands: Job, Post Process, Check the CAM job for common errors, Export Template

---

• Tool Commands: Inspect CAM Commands, CAM Simulator, Finish Selecting Loop, Toggle the Active State of the Operation, ToolBit Library editor, ToolBit Dock

---

• Basic Operations: Profile, Pocket Shape, Drilling, Face, Helix, Adaptive, Slot, Engrave, Deburr, Vcarve

---

• 3D Operations: 3D Pocket, 3D Surface, Waterline

---

• CAM Dressup: Axis Map, Boundary, Dogbone, DragKnife, LeadInOut, RampEntry, Tag, Z Depth Correction

---

• Supplemental Commands: Fixture, Comment, Stop, Custom, Probe, From Shape

---

• CAM Modification: Copy the operation in the job, Array, Simple Copy

---

• Specialty Operations: Thread Milling

---

• Miscellaneous: Area, Area workplane

---

• ToolBit architecture: Tools, ToolShape, ToolBit, ToolBit Library, ToolController

---

• Additional: Preferences, Scripting

Документация пользователя

• Начинающим
• Установка: Загрузка, Windows, Linux, Mac, Дополнительных компонентов, Docker, AppImage, Ubuntu Snap
• Базовая: О FreeCAD, Интерфейс, Навигация мыши, Методы выделения, Имя объекта, Настройки, Верстаки, Структура документа, Свойства, Помоги FreeCAD, Пожертвования

---

• Помощь: Учебники, Видео учебники
• Верстаки: Std Base, Arch, Assembly, CAM, Draft, FEM, Inspection, Mesh, OpenSCAD, Part, PartDesign, Points, Reverse Engineering, Robot, Sketcher, Spreadsheet, Surface, TechDraw, Test Framework

---

• Addons: Менеджер дополнений, Внешние верстаки, Cкрипты и макросы

---

• Hubs: Уголок пользователя, Уголок опытных пользователей, Уголок разработчиков